A1 Service - Thermal Imaging
0403 650 633
  • HOME
  • SERVICES
  • EQUIPMENT
  • WHY SCAN?
  • REGULATIONS
  • ABOUT
  • CONTACT
  • TESTIMONIALS
  • PARTNERS
  • INTERESTING IMAGES
Picture

Your Responsibilities?

Test and Tag

Under Chapter 4, Part 4.7 of the Work health and Safety Regulation 2011,(WHS Reg.) a person conducting a business or undertaking (PCBU) at a workplace must ensure that the electrical equipment is regularly inspected and tested by a competent person if the electrical equipment is:
  • supplied with electricity through an electrical socket outlet,and
  • used in an environment in which the normal use of electrical equipment exposes the equipment to operating conditions that are likely to result in damage to the equipment or a reduction in it's expected life span, including conditions that invole exposure to moisture, heat, vibration, mechanical damage, corrosive chemicals or dust (referred to as a hostile operating environment, See clause 150(1) of WHS Reg. ​
WHS Regulation 150
A record of testing must be kept until the electrical equipment is next tested, permanently removed from the workplace or disposed of. A record of testing must specify the following:
  • the name of the person who carried out the testing
  • the date of the testing
  • the outcome of the testing
  • the date o which the next testing must be carried out.
The record may be in the form of a tag attached to the electrical equipment tested.

RCD testing

RCD Testing Part 4.7 Division 6s.165(1) of the workplace health and safety Regulation 2011 - Penalties for not testing RCD's

New South Wales
​ 
  1. An employer must ensure that residual current devices used at the employers place of work are are tested regularly by a competent person to ensure that all devices are operating effectively.
  2. an employer must as soon as practicable replace a residual current device that is not operating effectively.
  3. An employer must keep a record of each testing of a residual current device until the next testing is carried out.
  4. This clause does not affect any requirement under Division 8 of this Part.
Division 6 Residual Current Devices

165 Testing of residual current devices

1. A person with management or control of a workplace must take all reasonable steps to ensure that residual current devices used at the workplace are tested regularly by a competent person to ensure that the devices are operating effectivly.

                                Maximum Penalty
                                 (a) in the case of an individual or                                                                $3,600.00
                                 (b) in the case of a body corporate                                                             $18,000.00

2. The person must keep a record of all testing of a residual current device (other than any testing conducted daily) until the earlier of the following occurs:

                                  (a) the device is next tested,
                                  (b) the device is permanently removed from use.

                                 Maximum Penalty
                                  (a) in the case of an individual or                                                               $1,250.00
                                  (b) in the case of a body corporate                                                             $6,000.00      ​
​  

Contact us today to find out more


Back
legislationnsw2011.pdf
File Size: 171 kb
File Type: pdf
Download File

Safework NSW Logo
HOME
SERVICES
EQUIPMENT
WHY SCAN?
ABOUT
CONTACT
TESTIMONIALS
PARTNERS
A1 Service - Thermal Imaging © 2014
All Rights Reserved